====== Step by step guide for the 802.1X WiFi on iOS ======


===== 1: Removing an old 802.1X profile from iOS (optional) =====
To ensure a clean installation, make sure to remove any existing old copies of our profile. \\ 
** This step is only needed if you already have an old version of our 802.1X configuration profile and wish to reinstall a new one.** \\  
Open the **Settings** App and navigate to **General**. \\ 
Tap **VPN & Device Management**, you will be presented with all installed and pending configuration profiles currently on your system. \\
Tap the one called **802.1X (GSG)** and press **Remove Profile**. You will be asked for your device Pin. Enter it and confirm the removal of the profile. \\  
If there is no profile called **802.1X (GSG)** on your device, you can skip to step 2. \\  
{{:en:ioswifi:001.png?400 }} {{ :en:ioswifi:002.png?400 }}  \\  
{{:en:ioswifi:003.png?400 }} {{ :en:ioswifi:004.png?400 }}  \\  

===== 2: Download the profile =====
In order to use the WiFi at our building, you will need to download the profile first. \\  
[[https://gsg.cs.uni-bonn.de/files/bitinf.mobileconfig|Click here to download it.]] \\
You should receive a pop up warning you that the website is trying to download a configuration profile. Tap **allow** to continue. \\  
If you have multiple devices connected to your Apple ID, you might be asked on which device to install the profile, in that case, choose the appropriate device (most likely "iPhone"). \\  
The profile will then be downloaded but still needs to be verified and installed in the settings app. \\  
{{ :en:ioswifi:005.png?400 }}  \\  {{ :en:ioswifi:006.png?400 }}  \\  {{ :en:ioswifi:007.png?400 }}

===== 3: Locating the new profile =====
Open the **Settings** App and navigate to **General**. \\ 
Tap **VPN & Device Management**, you should see our **802.1X (GSG)** profile in the **Downloaded Profile** list. \\
Tap on it to start the installation process. \\
{{:en:ioswifi:001.png?400 }} {{ :en:ioswifi:002.png?400 }}  \\  
{{ :en:ioswifi:008.png?400 }} \\ 

===== 4: Installing the new profile =====
After tapping the profile, you will be shown some general information about it. Tap **Install** to continue the installation process. \\
{{ :en:ioswifi:009.png?400 }} \\
Next, you will be informed, that your username and password will be stored on the device. Tap **Next**. \\  
You will then be informed that the "AAA Certificate Services" will be added to your system by the profile. Tap **Install**. \\  
{{:en:ioswifi:010.png?400 }} {{ :en:ioswifi:011.png?400 }}  \\  
Finally, a button labeled **Install** will appear, tap it to continue. \\
{{ :en:ioswifi:012.png?400 }} \\

===== 5: Providing your user data =====
After tapping the install button, you will be prompted for your username. \\  
This is the name of your computerscience account, followed by @informatik.uni-bonn.de, i.e. **username@informatik.uni-bonn.de**. \\
Do **not** omit the **@informatik.uni-bonn.de** part!! Do **not** use @bit.uni-bonn.de ! The profile **only** works with @informatik.uni-bonn.de ! \\  
{{ :en:ioswifi:013.png?400 }} \\
After entering your username, tap **Next**; you will now be prompted for your password. \\
Enter the password for your computer science account and tap **Next** again. \\
{{ :en:ioswifi:014.png?400 }} \\
After entering your device pin, the profile will be installed. \\
{{ :en:ioswifi:015.png?400 }} \\
Tap **Done** to leave the installation. \\

===== 6: Connecting to the WiFi =====
Return to the Settings App and tap **Wi-Fi** \\  
{{ :en:ioswifi:016.png?400 }} \\  
You should see **802.1X** under **My networks**. \\  
If you are on location in our building, tap it. \\
{{ :en:ioswifi:017.png?400 }} \\  
When connecting for the first time, you will be warned about an untrusted certificate. \\  
Verify it is our current certificate, then tap **Trust** to continue. \\ 
{{ :en:ioswifi:018.png?400 }} \\
You are now connected to our WiFi. \\
{{ :en:ioswifi:019.png?400 }} \\